Lotus 2″ Round Regressed Gimbal LED Fixture 5W
- 1 3/4″ Thin – Install Where Ceiling Space Is Limited.
- Fully Dimmable
- cULus Approved, Energy Star and T24 Certified
- Type IC Rated – Approved for Direct Contact with Insulation
- Air-Tight, Wet Location, Insulated and Non Insulated Ceilings
- Superb Light Quality with CRI > 90
- Recessed Housing is NOT Required even for Insulated Ceilings
- Warranty: 5 years
1/2″ Regressed Round 2″ Gimbal fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box.
One driver for every fixture required.
Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips.
Ceiling Clearance Required: 2″ with driver remotely installed, 5″ if driver is next to the fixture.
- Driver Input Voltage: 120V AC 60 Hz (Dimmable)
- Power factor: > 0.95
- Energy Used: 5W
- Halogen equivalent: 35W
- Beam Angle: 24° Beam with 20° tilt and 360° rotation
- Light colour options: Warm White 2700K, Soft White 3000K, Neutral White 4000K
- Light output: Warm White 380 lm, Soft White 400 lm, Neutral White 430 lm
- IP Rating – IP 54
- CRI: 94 for the 2700K & 3000K, 92 for the 4000K
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus approved, certified to CSA STD. C22.2 No. 250.0
- Rated: Type IC (Direct Contact with Insulation), Energy Star, T24, Air-Tight
- ID 2 1/2″, OD 3″; Thickness 1 3/4″
- Cut out: 2 1/2″ to 2 3/4″
- Junction Box Dimensions (with driver inside): 2 3/4″ x 2″ x 1 3/4″
Suitable for wet locations and soffit installations.
|Enable End Time Countdown||Yes|
|Cut Hole Size||USD$212,234.00|
|IP Rating||Wet Rated|
|Diffuser Lens||PMMA Diffuser|
|Minimum Working Temperature||-20°C|
|Material||Die Cast Aluminum|
|Package Contents||1 x Gimbal Fixture, 1 x Driver Box|
|Master Carton Size||24|